Index plunger 817 version G bolt diameter 4mm stainless steel 1.4305
| Shape | A |
|---|---|
| d1 -0,02/-0,04 [mm] | 4 |
| l1 min. [mm] | 4 |
| d2 [mm] | M8x1 |
| d3 approx. [mm] | - |
| d4 [mm] | M3 |
| d5 [mm] | 7 |
| l2 [mm] | - |
| l3 [mm] | 16 |
| l4 [mm] | 5 |
| sw [mm] | 10 |
| l5 Start [mm] | 4,5 |
| l6 End [mm] | 2,5 |
| Spring Pressure Start approx. [N] | 4,0 |
| Spring Pressure End approx. [N] | 12,0 |
| Weight [g] | 9,8 |
Material: Stainless steel 1.4305 (AISI 303), plunger pin nickel-plated. Knob: Plastic Thermoplast (polyamide) black, matt finish, cannot be disassembled.
Indexing plungers 817 offer the following advantages: - small outer dimensions - most of the release mechanism (version C/CK) is covered - defined thread length by an undercut at the end of the thread (version G/GK).
Version B/BK: with knob, without notched catch, this version is used where, on releasing the knob, the plunger pin should be returned to its initial position by the spring force.
Version C/CK: with knob, is used if the plunger pin has to remain in retracted position. To achieve this, the knob is rotated by 90 degrees after being retracted. A notched catch stops the locked-in knob from returning to its initial position accidentally or due to vibration.
Version G/GK: with threaded plunger end, for applications where a special knob to customer¿s request is required or where the plunger pin is not shifted manually.