Spherical bearing DIN ISO 12240-1-K type S with outer ring relubricateable bore 20mm outer diameter 46mm == Initial lubrication required before use ==

Product image
Product image
Katalóg: Zobraziť
Objednávací kód:  63302000
Pre pridanie produktu do košíka sa prosím prihláste.
d H7 [mm] 20
B+0/-0,12 [mm] 25
C+0/-0,24 [mm] 18
DA+0/-0,012 [mm] 46
d1 [mm] 24,3
Tipping Angle Alpha [°] 14
Weight [g] 200
Pre zobrazenie cien sa prosím prihláste .

Material: Inner ring bearing steel 100Cr6, hardened, ground and polished.
Bearing shell special brass CuZn38Al1.
Outer ring steel 9SMnPb28K, zinc plated.

  • Dimensions according to DIN ISO 12240-1 (DIN 648) series K (wide version).
  • Can be re-lubricated.
  • Initial lubrication required before use
  • For high sliding speed up to 60 m/min.
  • With outer ring (bigger outer diameter than version G or G..D).


Note: The specific loading of rod ends and spherical-plain bearings differs in each application. Therefore general statements by a producer in a catalogue may not totally fit to the single application. In all cases the user has to coordinate the theoretical selection criteria with the concrete installation situation and check the suitability of the rod end respectively spherical-plain bearing. In this context the user has to define sufficient security factors and maintenance intervals.