Slip shaft with joints PWNR stainless steel 1.4301 with needle bearings made of bearing steel bore 14H7 with keyway DIN 6885-1 on both sides min. length 220mm max. length 270mm
| d1H7 [mm] | 14 |
|---|---|
| d2 [mm] | 25 |
| d4 [mm] | 26,5 |
| l1 [mm] | 20 |
| l2 [mm] | 74 |
| l3 min. [mm] | 220 |
| l3 max. [mm] | 270 |
| C [mm] | 35 |
| E [mm] | 13 |
| F [mm] | 16 |
| b JS9 [mm] | 5 |
| t [mm] | 16,3 |
| zul.max.Drehmom. bei : 250 min -1 [Nm] | 32,6 |
| bei 500 min -1 [Nm] | 27,8 |
| bei 1000 min -1 [Nm] | 23,0 |
| bei 2000 min -1 [Nm] | 21,1 |
| bei 3000 min -1 [Nm] | 19,2 |
| bei 3600 min -1 [Nm] | 17,3 |
| Gewicht [kg] | 0,58 |
Pre zobrazenie cien sa prosím
prihláste
.
Material: Stainless steel 1.4301 (AISI 304). Needle bearings from steel EN 10027-1 DC04 (1.0338) and 100Cr6.
The combination of stainless steel body and standard needle bearings allows the use in applications where high speed and low backlash are required, even in demanding conditions. Max. Operating Angle per Joint 90°. Other lengths on request.
Optionally without or with keyway DIN 6885-1, on both sides.