Ball joint GF bore 16mm total length 74mm outer diameter 25mm material: plastic
| d1 [mm] | 16±0,05 |
|---|---|
| d2 [mm] | 25±0,2 |
| d3 [mm] | 6+0,1 |
| l1 [mm] | 20,5 |
| l2 [mm] | 74 |
| w [mm] | 10-0,1 |
| Torque max. [Nm] | 22 |
| Speed at operation angle 10°max. [rpm] | 1000 |
| Weight [g] | 35 |
Pre zobrazenie cien sa prosím
prihláste
.
Material: Polyacetal, glas-fibre reinforced. Temperature range: -30°C to +50°C. Max. operating angle 35°. Dimensioned according to DIN 808. For the joining taper pins, dowel pins or grooved pins can be used. The joints are maintenance free and can therefore be used in difficult-to-access parts of the machine. Other advantages compared to steel are less weight, corrosion resistance and chemical resistance.