Product image
Product image
Katalóg: Zobraziť
Objednávací kód:  61599840
Pre pridanie produktu do košíka sa prosím prihláste.
Inner Ø d [mm] 40
Shaft Ø dw [mm] 30 - 32
Torque T [Nm] 616 - 660
D [mm] 72
L [mm] 23,5
L2 [mm] 27,5
l [mm] 18
e [mm] 2,75
Bolts [No x Size] 6 x M6 x 20
Tightening Torque TA [Nm] 9,6
Contact Pressure P N [N/mm²] 173 - 184
Weight [kg] 0,50
Pre zobrazenie cien sa prosím prihláste .

Material: Stainless steel 1.4057 (AISI 431).

  • For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.
  • For medium torques.
  • Quick mounting.
  • Quick dismounting.
  • No axial offset during mounting.



Roughness: max, RZ=16 μm. Outer-Ø tolerance of hub = h9.

Recommended tolerances for hub bore / shaft diameter: from dw Ø 30 = H6/j6; Ø 31-50 = H6/h6; Ø 51-65 = H6/g6.
It is essential to degrease the contact surfaces of shaft and hub bore. Lubricate only the shrink disk and the screws with MoS2 and place it on the hub. Turn in the screws evenly by hand. Surface Roughness, Tolerances and Mounting Fasten the tensioning screws evenly, in sequence (not crossing over) until the fastening torque TA of the table is reached. To reach the value of TA, several fastening steps are required. The figures for T stated in the table were calculated for a lubricated shrink disk.



Do you have a clamping set with a foreign designation?
Recode it here in our exchange Tool

MÄDLER Tools - Switching tool for looking devices