Locking assembly COM-B stainless steel 1.4401 bore 18mm size 18-26
| d [mm] | 18 |
|---|---|
| D [mm] | 26 |
| L [mm] | 38 |
| A [mm] | 31 |
| L1 [mm] | 18 |
| L2 [mm] | 44 |
| D1 [mm] | 47 |
| Transferable Torque T [Nm] | 87 |
| Axial Force Fax [k N] | 10 |
| Surface Pressure Shaft PW [N/mm²] | 79 |
| Surface Pressure Hub PN [N/mm²] | 55 |
| Clamping Bolts DIN 912 [N. x Typ] | 4 x M6 |
| Torque TA [Nm] | 8 |
| Weight [kg] | 0,23 |
Pre zobrazenie cien sa prosím
prihláste
.
Material: Stainless steel 1.4401 (AISI 316).
Self-centering clamping bush for small hub diametres. For low torques. Self-locking. No axial movement during mounting.
Fit: Shaft h8. Hub H8. Surface roughness Rz max. 16 µm. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps.
Demounting: Remove all tensioning screws and screw them into the (usually unused) forcing thread of the front flange, until the flange is released.
Do you have a clamping set with a foreign designation?
Recode it here in our exchange Tool