Locking assembly COM-A stainless steel 1.4401 bore 19mm size 19-47
| d [mm] | 19 |
|---|---|
| D [mm] | 47 |
| L [mm] | 20 |
| L2 [mm] | 26 |
| Transferable Torque T [Nm] | 130 |
| Axial Force Fax [k N] | 15 |
| Surface Pressure Shaft PW [N/mm²] | 119 |
| Surface Pressure Hub PN [N/mm²] | 50 |
| Clamping Bolts DIN 912 [N. x Typ] | 8 x M6 |
| Torque TA [Nm] | 8 |
| Weight [kg] | 0,18 |
Pre zobrazenie cien sa prosím
prihláste
.
Material: Stainless steel 1.4401 (AISI 316).
Clamping bush for lower torques; not self-centering.
Fit: Shaft h8, Hub H8. Surface roughness Rz max. 16 µm.
Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Due to the cone angle, the clamping set is usually released once all screws have been fully unfastened. There a three large threads cut into the front ring, which serve to remove this ring.
Ts - Fastening Torque
T - Transmittable Torque
Do you have a clamping set with a foreign designation?
Recode it here in our exchange Tool