Locking assembly COM-B bore 70mm size 70-90
| d [mm] | 70 |
|---|---|
| D [mm] | 90 |
| L [mm] | 96 |
| A [mm] | 86 |
| L1 [mm] | 65 |
| L2 [mm] | 106 |
| D1 [mm] | 119 |
| Transmissible Torque T [Nm] | 5150 |
| Transmissible Axial Force Fax [k N] | 147 |
| Pw [N/mm²] | 88 |
| Surface Pressure Hub P [N/mm²] | 69 |
| Bolt Size M [DIN 912, 12.9] | 9 x M10 |
| Tightening Torque TA [Nm] | 83 |
| Weight [kg] | 3,0 |
Pre zobrazenie cien sa prosím
prihláste
.
Material: Steel. Self-centering clamping bush for small hub diametres. For medium torques. Self-Locking.
Fit: Shaft h8. Hub H8. Surface roughness Rz max. 12.5 µm.
Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps.
Demounting: Remove all tensioning screws and screw them into the (usually unused) forcing thread of the front flange until the flange is released.
Ts - Fastening Torque
T - Transmittable Torque
F - Transmittable Axial Force
P - Surface Pressure onto Hub
Do you have a clamping set with a foreign designation?
Recode it here in our exchange Tool