Mini clamping bush MSM bore 14mm
| d [mm] | 14 |
|---|---|
| D [mm] | 22 |
| D1 [mm] | 35 |
| L [mm] | 27,5 |
| L1 [mm] | 15 |
| L2 [mm] | 31,5 |
| Transmissible Torque T [Nm] | 66 |
| Transmissible Axial Force Fax [k N] | 9,5 |
| PW [N/mm²] | 90 |
| PN [N/mm²] | 70 |
| Bolts DIN 912 No. of [pcs] | 3 |
| Size | M4 x 12 |
| M No. [Nm] | 4 |
| Weight [kg] | 0,08 |
Pre zobrazenie cien sa prosím
prihláste
.
Material:Steel. Concentricity: about 0,02 mm. Tolerance: Shaft k6-h10, Hub H8. Mounting: The bush is mounted quickly. Just place the bush inside the hub and push both onto the shaft. Fasten with Allen key. Demounting: Remove tensioning screws. Put screws in forcing thread and fasten them until the bush is pressed off. MN = transmittable torque at load of 0. If the screws are fastened with Manz. Fa = transmittable axial force at torque of 0. If the screws are fastened with Manz. Manz = required fastening torque for the screws. The dimensions refer to bushes before assembly.
Do you have a clamping set with a foreign designation?
Recode it here in our exchange Tool