Locking assembly SIG stainless steel 1.4301 bore 15mm
| d [mm] | 15 |
|---|---|
| D [mm] | 20 |
| L [mm] | 28 |
| L1 [mm] | 23 |
| A [mm] | 21 |
| Torque M max. [Nm] | 24 |
| Thread | M17x1 |
| SW [mm] | 20 |
| Torque [Nm] | 25 |
| Weight [g] | 36,4 |
Pre zobrazenie cien sa prosím
prihláste
.
Material: Stainless steel 1.4301 (AISI 304).
These clamping set consists of three parts and allows to fix a cylindrical shaft inside a cylindrical bore in the drive wheel.
• For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.
• For lower torques.
• Minimal space requirement.
• Self-centering.
• Axial movement during mounting.
• The connection can be disassembled with a puller.
Mounting: The locking assembly has to be mounted without lubrication to achieve the torques stated above. Tighten the nut with a torque wrench with hexagon socket to the torque TA.
Do you have a clamping set with a foreign designation?
Recode it here in our exchange Tool