Friction clutch R2 with 6 friction lamellas type A bore 8mm
| Type | A |
|---|---|
| No. of Clutch Disks [pcs] | 6 |
| L [mm] | 32,4 |
| L1 [mm] | * |
| L2 [mm] | - |
| D1 [mm] | 25,8 |
| D2 [mm] | 21,97 |
| Bore B +0,03/-0 Side1 [mm] | 8 |
| Bore B +0,03/-0 Side 2 [mm] | 8 |
| Adjustment Screw Size Seite 1 | M 3x3, 2x90º |
| Adjustment Screw Seite 2 | - |
| Weight [g] | 48 |
| Matching Disk | - |
Pre zobrazenie cien sa prosím
prihláste
.
Material: Housing made of aluminium alloy with iridite NCP finish. Inner hub made of steel. As sliding hub for a driving wheel, for concentric arrangement. The driving wheel hasto be mounted and bonded by the customer on the outer diameter 21.97mm +0/-0,02mm. The construction is simple and basically consists of 4 or 6 clutch plates which are connected to the inner hub and held by the outer housing. Max. slip-speed 1000 rpm. Torsional backlash of the coupling below 2°. Torque range with 2 friction plates 2.4 Ncm to 53.8 Ncm. Torque range with 6 friction plates 7.8 Ncm to 132.4 Ncm. Maximum operating temperature 80°C. An adjusting ring - screwed to the outer body - serves to adjust the torque. Two sintered bearing sleeves serve as bearing housing to inner component. An O-ring seals the hub off against dirt.