Two-piece clamp coupling MAT both sides bore 10mm with keyway steel C45 black oxide finished with bolts DIN 912-12.9
| Type | mit Nut* |
|---|---|
| Torque max. [Nm] | 85 |
| d [mm] | 10 |
| A [mm] | 29 |
| R [mm] | 32,7 |
| L [mm] | 45 |
| Bolts DIN 912 [12.9] | M 4 x 12 |
| Torque Ms [Nm] | 4,6 |
| Weight [g] | 185 |
Pre zobrazenie cien sa prosím
prihláste
.
Material: Steel C45 burnished. Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - 12.9 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft.