Planetary small geared motor SFP 3 with DC-motor 24V i=7,5:1 idle speed 470 1/min. nominal torque 0.6 Nm
| Nenn- spannung [V] | 24 |
|---|---|
| Leerlauf- drehzahl n0 [min -1] | 470 |
| Nenn-- drehzahl n N [min -1] | 390 |
| Nenn- drehmoment MN [Nm] | 0,6 |
| max. Drehmoment Mmax. [Nm] | 2,3 |
| max. Strom Imax. [A] | 5,0 |
| Getriebe- stufen | 1 |
| Übersetzung [i] | 7,5:1 |
| Maß L [mm] | 43,5 |
| Gewicht [g] | 620 |
Housing: Motor: Steel, zinc-plated.
Gearbox: made of plastic. Can be mounted in any position.
Teeth: Gear set made from plastic.
Bearing: Output side, plain bearing, motor side A, ball bearing, motor side B, plain bearing.
Lubrication: Maintenance free grease lubrication.
Motor: Brushed DC motor 24 V, interference capacitive.
Change the direction of rotation by switching the polarity. Protection class acc. to EN 60529: IP 40.
Operating mode as per VDE 0530: S1 at nominal torque (continous torque),S2 at higher load.Permissible radial shaft load FR: Products with 1 gear stage 40 N; with 2 gear stages 65 N; with 3 gear stages 90 N.
Permissible axial shaft load FA: 40 N.
Note: All values are averages, measured with the motor cold. Deviations of 10% are possible.
To prevent the gearbox from being overloaded, the stated limit loads must not be exceeded.
*Recommended mounts: EJOT DELTA PT WN 5452 40 x ... ;
Keep screw depth 10mm.
Fastening torque max. 1,6 +0,2 Nm.
Other types (other speeds, optional incremental encoder, 12V) available on request.