Bevel gearbox KU/I model H size 2 version 80 i=6:1 (For operating instructions please visit the download area of our website www.maedler.de)
| Size | 2 |
|---|---|
| Type | 80 |
| Input Shaft d1 [mm] | 15 |
| Output Shaft d2 [mm] | 25 |
| Rim Length b [mm] | 120 |
| max. T2 at 8 min -1 [Nm] | 71 |
| max. T2 at 42 min -1 [Nm] | 69 |
| max. T2 at 83 min -1 [Nm] | 68 |
| max. T2 at 125 min -1 [Nm] | 68 |
| max. T2 at 167 min -1 [Nm] | 66 |
| max. T2 at 250 min -1 [Nm] | 64 |
| max. T2 at 500 min -1 [Nm] | 54 |
| max. P1 at 50 min -1 [k W] | 0,06 |
| max. P1 at 250 min -1 [k W] | 0,33 |
| max. P1 at 500 min -1 [k W] | 0,63 |
| max. P1 at 750 min -1 [k W] | 0,94 |
| max. P1 at 1000 min -1 [k W] | 1,22 |
| max. P1 at 1500 min -1 [k W] | 1,75 |
| max. P1 at 3000 min -1 [k W] | 2,95 |
| Weight [kg] | 12 |
Pre zobrazenie cien sa prosím
prihláste
.
General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry.Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model H: Straight-through hollow shaft, slowly turning.