Bevel gearbox KU/I model H size 2 version 80 i=1:1 (For operating instructions please visit the download area of our website www.maedler.de)
| Gearbox Size | 2 |
|---|---|
| Transmission | 80 |
| Input Shaft d1 [mm] | 25 |
| Output Shaft d2 [mm] | 25 |
| Rim Length b [mm] | 120 |
| Max. Md1 at 50 rpm [Nm] | 130 |
| Max. Md1 at 250 rpm [Nm] | 123 |
| Max. Md1 at 500 rpm [Nm] | 115 |
| Max. Md1 at 750 rpm [Nm] | 103 |
| Max. Md1 at 1000 rpm [Nm] | 92 |
| Max. Md1 at 1500 rpm [Nm] | 82 |
| Max. Md1 at 3000 rpm [Nm] | 66 |
| Max. P1 at 50 rpm [k W] | 0,72 |
| Max. P1 at 250 rpm [k W] | 3,39 |
| Max. P1 at 500 rpm [k W] | 6,34 |
| Max. P1 at 750 rpm [k W] | 8,51 |
| Max. P1 at 1000 rpm [k W] | 10,14 |
| Max. P1 at 1500 rpm [k W] | 13,56 |
| Max. P1 at 3000 rpm [k W] | 21,82 |
| Weight [kg] | 12 |
Pre zobrazenie cien sa prosím
prihláste
.
General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry.Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model H: Straight-through hollow shaft, slowly turning.