Bevel gearbox KU/I model L size 0 version 30 i=1:1 (For operating instructions please visit the download area of our website www.maedler.de)
| Size | 0 |
|---|---|
| Type | 30 |
| Input Shaft d1 [mm] | 12 |
| Output Shaft d2 [mm] | 12 |
| Edge Length b [mm] | 65 |
| Max. Md1 at 50 rpm [Nm] | 18 |
| Max. Md1 at 250 rpm [Nm] | 17 |
| Max. Md1 at 500 rpm [Nm] | 15 |
| Max. Md1 at 750 rpm [Nm] | 13 |
| Max. Md1 at 1000 rpm [Nm] | 12 |
| Max. Md1 at 1500 rpm [Nm] | 11 |
| Max. Md1 at 3000 rpm [Nm] | 10 |
| Max. P1 at 50 rpm [k W] | 0,1 |
| Max. P1 at 250 rpm [k W] | 0,47 |
| Max. P1 at 500 rpm [k W] | 0,83 |
| Max. P1 at 750 rpm [k W] | 1,07 |
| Max. P1 at 1000 rpm [k W] | 1,32 |
| Max. P1 at 1500 rpm [k W] | 1,82 |
| Max. P1 at 3000 rpm [k W] | 3,31 |
| Weight [kg] | 2,5 |
Pre zobrazenie cien sa prosím
prihláste
.
General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry.Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model L: Straight-through shaft, slowly turning.