Bevel gear made of stainless steel 1.4305 module 4 30 teeth i=2:1
| Transmission [i] | 2:1 (15/30) |
|---|---|
| Module | 4 |
| No. of Teeth | 30 |
| da [mm] | 123,8 |
| d [mm] | 120 |
| ND [mm] | 60 |
| NL [mm] | 15,0 |
| L1 [mm] | 33 |
| L [mm] | 39,4 |
| S [mm] | 28,8 |
| b [mm] | 28 |
| BH7 [mm] | 25 |
| E [mm] | 55 |
| Admissible MD [Nm] | 12,0 |
| Weight [kg] | 1,600 |
| Corresponding Counter Wheel [Article-No.] | 36199856 |
Pre zobrazenie cien sa prosím
prihláste
.
Material: Stainless steel 1.4305 (AISI 303).
Tooth quality 8 modelled on DIN 3967 (from module 2). Crowned, milled teeth. Shaft angle 90º. The bevel gears only run as a pair at the stated ratio and at the same module.
Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio.