Bevel gear made of stainless steel 1.4305 module 2.5 48 teeth i=3:1
| Transmission [i] | 3:1 (16/48) |
|---|---|
| Module | 2,5 |
| No. of Teeth | 48 |
| da [mm] | 121,6 |
| d [mm] | 120,0 |
| ND [mm] | 80 |
| NL [mm] | 15,0 |
| L1 [mm] | 29 |
| L [mm] | 33,9 |
| S [mm] | 28,5 |
| b [mm] | 20 |
| BH7 [mm] | 25 |
| E [mm] | 46 |
| Admissible MD [Nm] | 7,8 |
| Weight [kg] | 1,600 |
| Corresponding Counter Wheel [Article-No.] | 36199180 |
Pre zobrazenie cien sa prosím
prihláste
.
Material: Stainless steel 1.4305 (AISI 303).
Tooth quality 8 modelled on DIN 3967 (from module 2). Crowned, milled teeth. Shaft angle 90º. The bevel gears only run as a pair at the stated ratio and at the same module.
Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio.