Bevel gear made of stainless steel 1.4305 module 2.5 16 teeth i=1:1
Transmission [i] | 1:1 (16/16) |
---|---|
Module | 2,5 |
No. of Teeth | 16 |
da [mm] | 43,7 |
d [mm] | 40,0 |
ND [mm] | 30 |
NL [mm] | 10,0 |
L1 [mm] | 21 |
L [mm] | 23,8 |
S [mm] | 16,8 |
b [mm] | 11 |
BH7 [mm] | 10 |
E [mm] | 35 |
Admissible MD [Nm] | 1,1 |
Weight [kg] | 0,120 |
Corresponding Counter Wheel [Article-No.] | 36199107 |
Material: Stainless steel 1.4305 (AISI 303).
Tooth quality 8 modelled on DIN 3967 (from module 2). Crowned, milled teeth. Shaft angle 90º. The bevel gears only run as a pair at the stated ratio and at the same module.
Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio.