Bevel gear made of steel module 4 22 teeth i=1:1 milled
| Transmission [i] | 1:1 (22/22) |
|---|---|
| Module | 4 |
| No. of Teeth | 22 |
| da [mm] | 93,9 |
| d [mm] | 88 |
| ND [mm] | 50 |
| NL [mm] | 12 |
| L1 [mm] | 37 |
| L [mm] | 40,9 |
| S [mm] | 24,0 |
| b [mm] | 26 |
| BH7 [mm] | 20 |
| E [mm] | 65 |
| Admissible MD [Nm] | 27,9 |
| Weight [g] | 940 |
| Corresponding Counter Wheel [Article-No.] | 36181300 |
Pre zobrazenie cien sa prosím
prihláste
.
Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.
Tooth quality 8 modelled on DIN 3967 (from module 2).
Up to module 5 with crowned, milled teeth.
From module 6 with planed teeth. Not hardened – not lapped.
Shaft angle = 90º.
The bevel gears only run as a pair at the stated ratio and at the same module.
Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears, with the same module and the same number of teeth.