Bevel gear made of steel module 3 18 teeth i=1:1 milled
| Transmission [i] | 1:1 (18/18) |
|---|---|
| Module | 3 |
| No. of Teeth | 18 |
| da [mm] | 58,4 |
| d [mm] | 54 |
| ND [mm] | 40 |
| NL [mm] | 10 |
| L1 [mm] | 25 |
| L [mm] | 28,1 |
| S [mm] | 17,2 |
| b [mm] | 17 |
| BH7 [mm] | 10 |
| E [mm] | 42 |
| Admissible MD [Nm] | 6,4 |
| Weight [g] | 280 |
| Corresponding Counter Wheel [Article-No.] | 36140900 |
Pre zobrazenie cien sa prosím
prihláste
.
Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.
Tooth quality 8 modelled on DIN 3967 (from module 2).
Up to module 5 with crowned, milled teeth.
From module 6 with planed teeth. Not hardened – not lapped.
Shaft angle = 90º.
The bevel gears only run as a pair at the stated ratio and at the same module.
Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears, with the same module and the same number of teeth.