Bevel gear made of stainless steel 1.4305 module 1.5 48 teeth i=3:1
| Transmission [i] | 3:1 (16/48) |
|---|---|
| Module | 1,5 |
| No. of Teeth | 48 |
| da [mm] | 72,6 |
| d [mm] | 72,0 |
| ND [mm] | 50 |
| NL [mm] | 12,0 |
| L1 [mm] | 20 |
| L [mm] | 24,1 |
| S [mm] | 20,8 |
| b [mm] | 11,4 |
| BH7 [mm] | 15 |
| E [mm] | 32 |
| Admissible MD [Nm] | 1,35 |
| Weight [kg] | 0,405 |
| Corresponding Counter Wheel [Article-No.] | 36099780 |
Pre zobrazenie cien sa prosím
prihláste
.
Material: Stainless steel 1.4305 (AISI 303).
Tooth quality 8 modelled on DIN 3967 (from module 2). Crowned, milled teeth. Shaft angle 90º. The bevel gears only run as a pair at the stated ratio and at the same module.
Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio.