Bevel gear made of stainless steel 1.4305 module 1 16 teeth i=1:1
| Transmission [i] | 1:1 (16/16) |
|---|---|
| Module | 1 |
| No. of Teeth | 16 |
| da [mm] | 17,4 |
| d [mm] | 16 |
| ND [mm] | 14 |
| NL [mm] | 7,0 |
| L1 [mm] | 10 |
| L [mm] | 11,2 |
| S [mm] | 8,7 |
| b [mm] | 4,0 |
| BH7 [mm] | 5 |
| E [mm] | 16 |
| Admissible MD [Nm] | 0,06 |
| Weight [kg] | 0,009 |
| Corresponding Counter Wheel [Article-No.] | 36099507 |
Pre zobrazenie cien sa prosím
prihláste
.
Material: Stainless steel 1.4305 (AISI 303).
Tooth quality 8 modelled on DIN 3967 (from module 2). Crowned, milled teeth. Shaft angle 90º. The bevel gears only run as a pair at the stated ratio and at the same module.
Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio.