Bevel gear made of steel module 1.5 30 teeth i=2:1 milled
| Transmission [i] | 2:1(15/30) |
|---|---|
| Module | 1,5 |
| No. of Teeth | 30 |
| da [mm] | 45,9 |
| d [mm] | 45 |
| ND [mm] | 30 |
| NL [mm] | 12 |
| L1 [mm] | 18 |
| L [mm] | 20,7 |
| S [mm] | 17,6 |
| b [mm] | 7,6 |
| BH7 [mm] | 10 |
| E [mm] | 28 |
| Admissible MD [Nm] | 0,44 |
| Weight [g] | 124 |
| Corresponding Counter Wheel [Article-No.] | 36075600 |
Pre zobrazenie cien sa prosím
prihláste
.
Material: up to product no. 36105700: 11SMn30+SH (1.0715). From product no. 36106000: C45.
Tooth quality 8 modelled on DIN 3967 (from module 2).
Up to module 5 with crowned, milled teeth.
From module 6 with planed teeth. Not hardened – not lapped.
Shaft angle = 90º.
The bevel gears only run as a pair at the stated ratio and at the same module.
Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio.