Bevel gear made of steel module 1.5 20 teeth i=1.5:1 milled
| Transmission [i] | 1,5:1 (20/30) |
|---|---|
| Module | 1,5 |
| No. of Teeth | 20 |
| da [mm] | 33,1 |
| d [mm] | 30 |
| ND [mm] | 20 |
| NL [mm] | 9 |
| L1 [mm] | 17 |
| L [mm] | 18,9 |
| S [mm] | 12,5 |
| b [mm] | 8,1 |
| BH7 [mm] | 8 |
| E [mm] | 34 |
| Admissible MD [Nm] | 0,43 |
| Weight [g] | 52 |
| Corresponding Counter Wheel [Article-No.] | 36075300 |
Pre zobrazenie cien sa prosím
prihláste
.
Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.
Tooth quality 8 modelled on DIN 3967 (from module 2).
With crowned, milled teeth. Not hardened – not lapped.
Shaft angle = 90º.
The bevel gears only run as a pair at the stated ratio and at the same module.
Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio.