Bevel gear made of brass Ms58 module 1 20 teeth i=1.5:1 milled
| Transmission [i] | 1,5:1 (30/20) |
|---|---|
| Module | 1 |
| No. of Teeth | 20 |
| da [mm] | 22,1 |
| d [mm] | 20 |
| ND [mm] | 15,0 |
| NL [mm] | 5,0 |
| L1 [mm] | 10,0 |
| L [mm] | 11,1 |
| S [mm] | 7,2 |
| b [mm] | 5 |
| BH7 [mm] | 5 |
| E [mm] | 21,5 |
| Admissible MD [Ncm] | 18,0 |
| Weight [g] | 16 |
| Corresponding Counter Wheel [Article-No.] | 35055300 |
Pre zobrazenie cien sa prosím
prihláste
.
Material:Brass Ms58 (2.0401).
Milled teeth. Shaft angle = 90°. The bevel gears only run as a pair at the stated ratio.
Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio.