Bevel gear made of brass Ms58 module 1 36 teeth i=1:1 milled
| Transmission [i] | 1:1 (36/36) |
|---|---|
| Module | 1 |
| No. of Teeth | 36 |
| da [mm] | 37,4 |
| d [mm] | 36 |
| ND [mm] | 16,0 |
| NL [mm] | 7,0 |
| L1 [mm] | 11,5 |
| L [mm] | 13,0 |
| S [mm] | 9,6 |
| b [mm] | 5 |
| BH7 [mm] | 5 |
| E [mm] | 26,9 |
| Admissible MD [Ncm] | 62,0 |
| Weight [g] | 43 |
| Corresponding Counter Wheel [Article-No.] | 35052300 |
Pre zobrazenie cien sa prosím
prihláste
.
Material:Brass Ms58 (2.0401).
Milled teeth. Shaft angle = 90°. The bevel gears only run as a pair at the stated ratio.
Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio.