Product image
Product image

Material: Inner ring bearing steel 100Cr6, hardened, ground and polished.
Bearing shell special brass CuZn38Al1.

  • Dimensions according to DIN ISO 12240-1 (DIN 648) series K (wide version).
  • Can be re-lubricated (from size size 6mm with lubrication hole).
  • Initial lubrication required before use
  • For high sliding speed up to 60 m/min.
  • Without outer ring (smaller outer diameter than version S or S...D).

Note: The specific loading of rod ends and spherical-plain bearings differs in each application. Therefore general statements by a producer in a catalogue may not totally fit to the single application. In all cases the user has to coordinate the theoretical selection criteria with the concrete installation situation and check the suitability of the rod end respectively spherical-plain bearing. In this context the user has to define sufficient security factors and maintenance intervals.


SKU d H7 [mm] B+0/-0,12 C+0/-0,24 D+0/-0,012 [mm] d1 [mm] Tipping Angle Alpha [°] Weight [g]
63320500 5 8 6 13 7,7 13 5
63320600 6 9 6,75 16 8,9 13 9
63320800 8 12 9 19 10,4 14 16
63321000 10 14 10,5 22 12,9 13 25
63321200 12 16 12 26 15,4 13 40
63321400 14 19 13,5 28 16,8 16 51
63321600 16 21 15 32 19,3 15 76
63321800 18 23 16,5 35 21,8 15 97
63322000 20 25 18 40 24,3 14 141
63322200 22 28 20 42 25,8 15 168
63322500 25 31 22 47 29,6 15 231
63323000 30 37 25 55 34,8 17 362
63323500 35 43 28 62 37,7 19 502
63324000 40 49 35 72 44,2 16 832
63300500 5 7,7 13 8
63300600 6 8,9 13 12
63300800 8 10,4 14 23
63301000 10 12,9 13 38
63301200 12 15,4 13 58
63301400 14 16,8 16 83
63301600 16 19,3 15 115
63301800 18 21,8 15 150
63302000 20 24,3 14 200
63302200 22 25,8 15 270
63302500 25 29,6 15 375
63303000 30 34,8 17 540
63303500 35 37,7 19 850
63304000 40 44,2 16 1400