Round Gear Racks with Metric Pitch 5 mm and 10 mm, Steel
Material: Up to length 1500mm: Steel St50K. Length 2000mm = Steel C45k. Outside diameter = h6 ground. Straight teeth, milled. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. Pitch 5 mm = module 1.59. Pitch 10 mm = module 3.18. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: Pitch 5 mm: -0.2 mm. Pitch 10 mm: -0.3 mm.
| SKU | Pitch [mm] | Modul | Nominal Length L [mm] | D [mm] | h0 [mm] | ha [mm] | b [mm] | Weight [kg] |
|---|---|---|---|---|---|---|---|---|
| 20563100 | 5 | 1,59 | 500 | 15 | 13,4 | 15 | 9,4 | 00,64 |
| 20563200 | 5 | 1,59 | 1000 | 15 | 13,4 | 15 | 9,4 | 1,28 |
| 20563400 | 5 | 1,59 | 2000 | 15 | 13,4 | 15 | 9,4 | 2,56 |
| 21063100 | 10 | 3,18 | 500 | 30 | 26,8 | 30 | 18,8 | 2,59 |
| 21063200 | 10 | 3,18 | 1000 | 30 | 26,8 | 30 | 18,8 | 5,14 |
| 21063400 | 10 | 3,18 | 2000 | 30 | 26,8 | 30 | 18,8 | 10,28 |