Precision Gear Racks, Steel, Hardened and Ground, Module 1 to 3
Material: 16MnCr5, tooth area induction hardened, HRC 58 ±2. Ground on all sides including the teeth. As only the teeth are hardened subsequent drilling and pinning is easily possible. Straight teeth. Pressure angle 20°. Teeth milled, hardened and ground. Tooth quality 7h25. From Module 1,5 cut for continuous linking. Tolerances: Angle accuracy 0,02 mm. Parallelism at length 500 mm = 0,03 mm. Parallelism at length 1000 mm = 0,05 mm. Tolerance to h0-line: on 500 mm = 0,03 mm. on 1000 mm = 0,05 mm. The width is machined with a tolerance of 0,05.
| SKU | Module | Tooth idth b [mm] | ha [mm] | h0 [mm] | Nominal Length L [mm] | Nominal Length [mm] | Weight [kg] |
|---|---|---|---|---|---|---|---|
| 22468300 | 1,0 | 15 | 15 | 14 | 500 | 500,0 +1 | 0,81 |
| 22868300 | 1,5 | 15 | 15 | 13,5 | 500 | 499,1 +/-0,3 | 0,78 |
| 22868500 | 1,5 | 15 | 15 | 13,5 | 1000 | 998,4 +/-0,3 | 1,56 |
| 24168300 | 2 | 20 | 20 | 18 | 500 | 502,1 +/-0,3 | 1,40 |
| 24168500 | 2 | 20 | 20 | 18 | 1000 | 998,5 +/-0,3 | 2,53 |
| 24368300 | 3 | 25 | 25 | 22 | 500 | 498,9 +/-0,3 | 2,12 |
| 24368500 | 3 | 25 | 25 | 22 | 1000 | 998,4 +/-0,3 | 4,22 |