Locking Assemblies TT, boreholes 3 - 16 mm

Product image
Product image

Material: Steel.

  • For fixing a hub (e.g. drive wheel,
  • rotor or similar) on a shaft.
  • For high torques.
  • Self-centering.
  • Axial offset during mounting (can be compensated by correct positioning).
Tolerances, Surfaces Ø-tolerance for shafts and hubs +/- 0.04mm. Mounting It is essential to degrease the shaft and hub. Install the locking assembly as delivered, never lubricate it. Tighten the nut with a torque wrench with hexagon socket to the torque TA.

Do you have a clamping set with a foreign designation?
Recode it here in our exchange Tool

MÄDLER Tools - Switching tool for looking devices

SKU d [mm] D [mm] L [mm] L1 [mm] B [mm] Transmissible Torque T [Nm] Transmissible Axial Force Fax [k N] Surface Pressure Hub [N/mm²] Wrench Width SW [mm] Tightening Torque TA [Nm] Weight [g]
61550103 3 16 19 10 3 8 4 73 13 12 20
61550104 4 16 19 10 3 10 4 73 13 12 20
61550105 5 16 19 10 3 11 4 73 13 12 19
61550106 6 16 19 10 3 13 4 73 13 12 18
61550107 7 20 22 11 3 35 10 119 16 28 34
61550108 8 20 22 11 3 40 10 119 16 28 33
61550109 9 20 22 11 3 45 10 119 16 28 32
61550110 10 23 26 13 5 65 13 116 19 44 49
61550111 11 23 26 13 5 72 13 116 19 44 47
61550112 12 23 26 13 5 79 13 116 19 44 45
61550114 14 26 29 16 5 118 17 107 22 66 65
61550115 15 26 29 16 5 126 17 107 22 66 62
61550116 16 26 29 16 5 135 17 107 22 66 59