Internal Freewheels TSS

Product image
Product image

These sprag freewheels without own bearing support in premium quality can be used as indexing freewheels, backstops or overrunning clutches. They allow a compact design and are installed in housings provided by the customer. The user must ensure proper bearings, lubrication and sealing during installation. Radial forces are not permitted. The nominal dimensions d x D x B correspond to the dimensions of ball bearing series 62. With keyway on the inner ring.

Keyway: The keyway is up to diameter d=12mm according to DIN 6885-1. Above that according to DIN 6885-3.

Mounting: For the bearing and the freewheel, the same installation tolerances must be provided. Recommended housing tolerance H7. For the shaft h7. During installation, care must be taken to ensure the correct direction of rotation. The direction of rotation is indicated by a marking arrow on the freewheel.

Lubrication: Oil lubrication, see Additional Documents. Oils or other lubricants containing EP additives must not be used.

Temperature range: approx. -10°C to + 50°C.

Other versions on request.

SKU d H7 [mm] D [mm] B [mm] d1 [mm] D1 [mm] E [mm] r1 [mm] b [mm] t [mm] Drehmoment [Nm] Schleppmoment [Nm] max. Überholdrehzahl Innenring [min-1] max. Überholdrehzahl Außenring [min-1] Gewicht [g]
TSS8 8 24 8 11,4 22,2 0,6 0,6 2 1,0 6,7 0,005 6000 3000 14
TSS10 10 30 9 15,6 27 0,6 0,6 3 1,4 12 0,007 4500 2300 27
TSS12 12 32 10 18 29,5 0,6 0,6 4 1,8 17 0,009 4000 2000 31
TSS15 15 35 11 20,6 32 0,6 0,6 5 1,2 22 0,01 3500 1800 39
TSS20 20 47 14 26,7 40 0,8 0,8 6 1,6 41 0,01 2600 1300 115
TSS25 25 52 15 32 45 0,8 0,8 8 2,0 56 0,02 2200 1100 140
TSS30 30 62 16 40 55 0,8 1,0 8 2,0 105 0,03 1800 900 215
TSS35 35 72 17 45 63 0,8 1,0 10 2,4 136 0,03 1600 800 300
TSS40 40 80 18 50 72 0,8 1,0 12 2,2 296 0,18 1400 700 425
TSS45 45 85 19 57 75,5 1,2 1,0 14 2,1 347 0,21 1300 650 495
TSS50 50 90 20 62 82 1,2 1,0 14 2,1 403 0,22 1200 600 545
TSS60 60 110 22 80 100 1,2 1,5 18 2,3 649 0,33 910 460 950