Gear Racks, Steel, with Metrical Pitch 5 mm and 10 mm
Material: Steel C45K. Milled teeth. Precisely Straightened. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3962, 3967, 3968. Pitch 5 mm = Module 1.59. Pitch 10 mm = Module 3.18. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: At pitch 5mm: -0,2 mm. At pitch 10mm: -0,3 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch.
| SKU | Pitch [mm] | Material | Tooth Width b [mm] | Overall Height a [mm] | Nominal Length L [mm] | Weight [kg] |
|---|---|---|---|---|---|---|
| 20560100 | 5 | 1,59 | 15 | 15 | 250 | 00,39 |
| 20560300 | 5 | 1,59 | 15 | 15 | 500 | 00,78 |
| 20560500 | 5 | 1,59 | 15 | 15 | 1000 | 1,55 |
| 20560900 | 5 | 1,59 | 15 | 15 | 2000 | 3,10 |
| 21060100 | 10 | 3,18 | 30 | 30 | 250 | 1,59 |
| 21060300 | 10 | 3,18 | 30 | 30 | 500 | 3,17 |
| 21060500 | 10 | 3,18 | 30 | 30 | 1000 | 6,27 |
| 21060900 | 10 | 3,18 | 30 | 30 | 2000 | 12,43 |